How to Disable Windows 10 Automatic Updates

Microsoft has made it pretty hard for users to disable Automatic Windows Update on your Windows 10 Desktop , Laptop or Tablet, But no need to worried, He have done some digging around the area to find some solution on how to go about disabling Windows 10 from automatically updating . Feel free to visit below, Please note that this instruction might apply to Windows 10 Pro users and not Windows 10 Home users . Please read the instruction carefully and follow step by step, skipping one might not disable your Windows 10 Update and might cause issue with your Operating System .

 

 

Option 1: Stop The Windows Update Service

As central as it is to the core of Windows 10, Windows Update is actually just another Windows process so it can be stopped with these simple steps:

  1. Open the Run command (Win + R), in it type: services.msc and press enter
  2. From the Services list which appears find the Windows Update service and open it
  3. In ‘Startup Type’ (under the ‘General’ tab) change it to ‘Disabled’
  4. Restart

To re-enable Windows Update simply repeat these four steps, but change the Startup Type to ‘Automatic’

Option 2: Setup A Metered Connection

Windows 10 offers users on metered connections a compromise: to save bandwidth Microsoft confirms the operating system will only automatically download and install updates it classifies as ‘Priority’.

While Microsoft doesn’t reveal its method of classification, this does cut down more frivolous updates which typically include new drivers and software features – both of which have already caused stability problems.

  1. Open the Settings app (Win + I)
  2. Open the ‘Network & Internet’ section
  3. Open ‘Wi-Fi’ and click ‘Advanced Options’
  4. Toggle ‘Set as metered connection’ to ‘On’

Note: If your PC uses an Ethernet cable to connect to the Internet the Metered Connection option will be disabled as it works with Wi-Fi connections only (silly I know).

Option 3: Group Policy Editor

This is a halfway house: the group policy editor will notify you about new updates without automatically installing them (how previous generations of Windows always worked) – though again security updates will still install automatically.

Note: Windows 10 Home users have to sit this one out, it is only for Windows 10 Education, Pro and Enterprise editions.

  1. Open the Run command (Win + R), in it type: gpedit.msc and press enter
  2. Navigate to: Computer Configuration -> Administrative Templates -> Windows Components -> Windows Update
  3. Open this and change the Configure Automatic Updates setting to ‘2 – Notify for download and notify for install’
  4. Open the Settings app (Win + I) and navigate to -> Update and Security -> Windows Updates. Click ‘Check for updates’ which applies the new configuration setting
  5. Restart

Alternatively for Windows 10 users without group policy access:

  1. Open the Run command (Win + R), in it type: regedit and press enter
  2. Navigate to: HKEY_LOCAL_MACHINESOFTWAREPoliciesMicrosoftWindowsWindowsUpdateAU
  3. In there create a ‘32-bit DWORD’ value called ‘AuOptions’ and under ‘Value Data’ type 2 and click ‘OK’
  4. Open the Settings app (Win + I) and navigate to -> Update and Security -> Windows Updates. Click ‘Check for updates’ which applies the new configuration setting
  5. Restart

 

Option 4: The Show/Hide Tool

Strangely the so-called ‘Show/Hide Tool’ is not part of Windows 10 nor can it be found through Windows Update. Instead it can be downloaded from out server by Clicking Here.

Unlike the three options above, the Show/Hide Tool is not proactive so it doesn’t stop any automatic updates from downloading and installing. Instead it allows you to ‘Hide’ an update from Windows 10 so if you uninstall it Windows Update will not try to reinstall it automatically.

This is very useful if a particular update is causing your system problems. Then again the Show/Hide Tool doesn’t work with Priority Updates.

Source of Information

BElow is the source of where the information was made available, Feel free to visit the source for more information regarding how to Disable Windows 10 Automatic Update by going here www.forbes.com

How to Enable Windows 10 Hidden Dark Theme

Are you a Windows users who love to play with customization on Windows theme, Then you are in luck as we have found a tutrial on How to Enable Windows 10 Hidden Dark Theme for your Windows OS running on Desktop , Laptops and Tablets , This is an awesome looking theme and I think ya guys will agreed, Feel free to read a bit more below as well follow the source for more information about this awesome dark theme for Windows 10 OS .

 

Microsoft may eventually add a toggle to the Settings app that switches between a system-wide light theme and dark theme. This is the way it works on Windows Phone. For now, you can still enable a system-wide dark theme — it just requires editing the registry. This will enable the dark theme for quite a few universal apps, but not all of them.

 

You can do this manually with the instructions below, or download our Enable Dark Theme on Windows 10 registry hack. Just double-click the included .reg file to enable the dark theme, and double-click the other included .reg file to re-enable the light theme.

Click to Download Windows 10 registry hack Here

 

Source of Information

Here you will find the original article of this Source , Feel free to visit it to continue reading more about this Dark Theme for Windows 10 OS .

Click to go to Source of information located at www.howtogeek.com

How to fix Error Code C1900101-20017

Error Code C1900101-20017 when installaing Windows 10

Below you will find a bit information on how to fix Error Code C1900101-20017 when installing/upgrading Windows 10.

 

Step 1: Navigate to C:WindowsSoftwareDistributionDownload

Step 2: Delete all the files contained in the folder. Also, delete the $Windows.~BT folder located on the root of the system drive.

So, instead of utilizing Microsoft’s own upgrade process, you need to perform a clean install. To do this, download the Windows 10 Install ISO from Microsoft’s official website. Following which, you need to create a bootable installation media using Microsoft’s Media Creation tool.

Once the flash drive is prepared, you need to rectify a couple of settings from the BIOS menu.

Step 1: Reboot your system to bring and as soon as the display starts, repeatedly press the key which triggers the BIOS menu. The F12 or Delete key does the trick in most cases.

Step 2: Disable all overclocking options if you’ve set your processor to a higher clock speed.

Step 3: Enable UEFI Boot from the BIOS. The setting is found in the Boot section for most manufacturer's BIOS.

Now you need to install the OS by booting from the installation media you created earlier and the setup should process smoothly.

How to Scan Documents and Photos

How to Scan Documents and Photos

Thirty5Tech NYC Computer Repair How to Scan Documents and Photos

Thirty5Tech NYC Computer Repair brings you a easy way to scan your documents and photos using the built in Windows FAX and Scanning Options which most Windows Operating System have . Feel free to follow the instruction below carefully , If you are still having issue scanning your items, then feel free to watch the video below for How to Scan Documents and Photos and Videos

Before you begin, make sure your scanner is properly installed and turned on.

  1. Click the Start button , click All Programs, and then click Windows Fax and Scan.
  2. Click Scan at the bottom of the left pane.

  3. On the toolbar, click New Scan.

  4. In the New Scan dialog box, click the Profile list, and then choose Documents. The default settings for scanning a document, which you can use or change, are automatically displayed.

  5. To see how your document will appear when scanned, click Preview.

  6. Click Scan.

To scan pictures with Windows Fax and Scan

Before you begin, make sure your scanner is properly installed and turned on.

  1. Click the Start button , click All Programs, and then click Windows Fax and Scan.
  2. Click Scan in the bottom of the left pane.

  3. On the toolbar, click New Scan.

  4. In the New Scan dialog box, click the Profile list, and then click Photo. The default settings for scanning a photo, which you can use or change, are automatically displayed.

  5. To see how the photo will appear when scanned, click Preview. If needed, change your scan settings, and then preview the image again.

  6. Click Scan.